KD-030  石材環氧面膠


  • 類型:石材養護 - 清洗

  • 原產地:武漢

  • 規格:--

  • 供應能力:應客戶要求

  • 最小訂單量:無限量

該產品為液體狀不含溶劑的流動的雙組份粘膠劑。它以一種改性昂貴的聚胺固化劑和改性特種環氧樹脂為主劑組成,硬度高,適用淺色石材使用,主要用于強力密封填補裂紋及一般毛孔。產品具有以下特性:<br> 1、無色透明,光澤<br> 2、粘度小,附著力強<br> 3、可工作時間長<br> 4、非常優異的耐候性,不黃變,附著力強,特別適合室外使用<br> 5、耐磨、耐油、耐水、耐酸、耐堿、耐化學介質<br> 6、具有熱穩定性和電絕緣性<br> 7、增強石材表面質量,提高產品成品率和生產率<br> 8、出色的研磨及拋光性<br> 9、該產品不易結晶,因而能較好的儲存及使用<br> 應用領域: <br> 主要用于石材加工行業,用來補強填補多孔及有裂紋凸凹不平的天然石材和混凝土上,提高其表面質量和產品率及效益??商娲装l黃的樹脂來粘合淺色石材。還可粘接硬PVC、聚氨酯、聚苯乙烯、ABS、紙、木材、工藝品(如水晶和鉆石)等。特別適合粘合玻璃,使其保持透明性。不適宜粘接的材料有聚乙烯、聚丙烯、硅氧烷、特氟龍等。還可用于機械工程和造型工程。在電子工業中可用于鑄造和密封電子元件。<br> 技術參數:<br> 1、顏色:A組份無色透明,B組份無色或淡黃色透明<br> 2、混合后可工作時間,25℃:50克樣充分混合后80-100分鐘<br> 3、完全固化時間25℃:2 -7天<br> 4、保質期:陰涼處,原容器密封保存一年,超過保存期應重新檢測合格后再使用<br> It is a 2-component liquid adhesive free of solvent. It's composed of expensive modified solidication agent and epoxy resin, mainly used to fill up and seal cracks and pores.&nbsp;&nbsp;It has following properties:<br> 1.Transparent liquid, shiny, suitable for light-color stones. <br> 2.Slight viscosity with strong adhesion.<br> 3.Long working time. <br> 4.Weather resistant, non-yellowing, good adhesion, suitable for outdoor use.<br> 5.Abrasion resistant, water oil, acid, alkali and chemical repellent<br> 6.Electric insulation and thermal stability.<br> 7.Improve the quality of stone surface and increase productivity.<br> 8.Excellent in grinding and polishing.&nbsp;&nbsp;&nbsp;<br> 9. Uneasy to crystallize, therefore, it's easy to store and use<br> Application:<br> This product is mainly used to strengthen stone plates and concrete with cracks, pores, sand holes, ant lines, and scraggly surface to improve its quality. It can replace the resin which tends to yellowing to stick light-color stones. It can stick hard PVC, polyurethane, polystyrene, ABS, paper, wood and artworks (such as crystal and diamond) and so on. It is especially suitable for sticking glass in transparent color. It also can be applied to mechanical engineering and molding work and used to cast and seal the electronic components in electric industry. It is not suitable to stick polyethylene, polypropylene, siloxane and Teflon materials.<br> Technical Parameter:<br> 1. Color: Component A is colorless and transparent; Component B is colorless or yellowish transparent.<br> 2.Working time (25℃):80-100minutes (50g sample products mix up proportionately)<br> 3.Full solidification time(25℃): 2-7 days<br> 4.Guarantee period: One year if stored in original packing with seal. It still can be used if tested to be usable after expiration date.<br> <br>
¥ 詢 價